Using the Scanner Function
54
2
Relationship between Resolution and File
Size
Resolution and scan area are inversely related. The higher the resolution is set,
the smaller the area that can be scanned. Similarly, the larger the scan area, the
lower the resolution that can be set.
The relationship between scanning resolution and file size is shown below. If the
file size is too large, the message “Exceeded max.data capacity. Check the scan-
ning resolution.” appears on the machine's control panel, and you must specify
the scan size and resolution again.
Note
❒ Maximum image size is limited according to the level of compression.
When Using as a TWAIN Scanner
All combinations up to 297 × 432 mm/11.7 × 17.1 inches (A3, 11 × 17 inches) and
600 dpi are possible.
Reference
To specify the scanning area or resolution when using the machine as a net-
work TWAIN scanner, see TWAIN driver Help.
To Next Page
Loading...
