Error Messages on the Display
15
4
Error Messages on the Display
This section explains the most common network-related messages that appear
on the display. If a message not shown here appears, follow its instructions.
Messages without Code Numbers
Reference
Before turning the main power off, see “Turning On the Power”, About this
Machine.
Message Causes Solutions
hCannot connect to network
Check IP Address.
Network connection could
not be established.
Check the machine's IP ad-
dress.
hCannot connect to network
Contact administrator.
Network connection could
not be established.
Check the network. If this
message continues to appear,
contact your Administrator.
Ethernet Board Error An Ethernet board error has
occurred.
Turn off the main power
switch, wait a few seconds,
and then turn it back on. If this
message continues to appear,
contact your sales or service
representative.
hServer communicat. failed
Contact administrator.
Cannot communicate with the
server.
Check the server. If this mes-
sage continues to appear, con-
tact your Administrator.
To Next Page
Loading...
