Ricoh Aficio MP 2500 - Specifying the Original Size When the Bypass Tray Is Selected

Placing Originals
18
1
Specifying the Original Size When the Bypass Tray is Selected
You can select either regular or custom for the size of the original when the by-
pass tray is selected.
Regular sizes
When placing regular size originals on the exposure glass or in the ARDF, select
the size of the originals from the regular sizes shown on the display.
A Select [Byp.] using {U} or {T}.
B Press the {q} key.
C Select [Original Size] using {U} or {T}, and then press the {OK} key.
D Select [Regular Size] using {U} or {T}, and then press the {OK} key.
When [Auto Detect] is selected, the size of the placed original will be detected
automatically.