2
Setting Up the Machine on a Network
This section describes the network settings you can change with User Tools (In-
terface Settings). Make settings according to functions you want to use and the
interface to be connected.
Important
❒ These settings should be made by the systems administrator, or after consult-
ing with the systems administrator.
Initial Settings Overview
❖ Interface Settings
Initial Settings
Viewing the Information Displayed in the List
These items must be set to use the function. Be sure to set them before attempt-
ing to use the corresponding function.
These items must be set if required.
❖ Printer
❖ Network TWAIN Scanner
Menu Description
IP Address Specifies the machine IP address and subnet
mask in the network environment.
Gateway Address Configure the gateway address for the router
or host computer used as a gateway.
Ethernet Speed Set the access speed for networks.
Settings
Interface Settings/Net-
work
IP Address
Gateway Address
Ethernet Speed
Settings
Interface Settings/Net-
work
IP Address
Gateway Address
Ethernet Speed
To Next Page
Loading...
