The Scanner Function
85
6
Reference
“Turning On the Power”, About This Machine
Error has occurred
in the scanner driv-
er.
An error has occurred in the
driver.
• Check whether the network
cable is connected correctly
to the client computer.
• Check whether the Ether-
net board of the client
computer is recognized
correctly by Windows.
• Check whether the client
computer can use the
TCP/IP protocol.
Communication error
has occurred on the
network.
A communication error has
occurred on the network.
Check whether the client comput-
er can use the TCP/IP protocol.
Insufficient memory.
Close all other ap-
plications, then re-
start scanning.
Memory is insufficient. • Close all the unnecessary
applications running on
the client computer.
• Uninstall the TWAIN
Driver, restart the comput-
er, and then reinstall the
TWAIN Driver.
Message Cause Solution
To Next Page
Loading...
