116 EN USA D010-7621A
P
Panel tone, 4
Paper is not fed from selected tray
, 49, 77
Parts of image not copied
, 14
Password not correct
, 6
Power connection
, 111
Power Failure Report
, 37
Power supply
, 111
Precautions when locating the machine
, 109
Precautions when moving the machine
, 110
Printed image is different from
computer display
, 49, 77
Printed image is faded
, 49, 77
Printed image is in wrong orientation
, 49, 77
Printer driver installation
, 39, 69
Printing
, 31
Printing does not start
, 46, 75
Print port settings
, 46, 75
R
RDS (Remote Diagnostic System), 37
Reception
, 31
Release button
, 93
Removing jammed paper
, 103
Removing jammed staples
, 108
Removing toner
, 98
Replacing toner
, 98
Reverse side of original is copied
, 6, 14
S
Scanned image contains white spaces
, 57, 82
Scanned image is dirty
, 57, 82
Scanned image is distorted
, 57, 82
Scanned image is out of position
, 57, 82
Scanned image is upside down
, 57, 82
Scanner Properties dialog box not displayed
, 58
Selecting the paper size with user tools
, 95
Server-Generated Error E-mail
, 38
Shadow appears on copies
, 14
Side fences
, 93
Stamp cartridge replacement
, 101
Status messages
, 42, 71
T
Toner, 98, 99
Transmission
, 31
Transmission/Reception
, 31
TWAIN
, 65, 83
Two-sided paper
, 89
U
User code entry, 6
V
Volume adjustment, 21
W
Waste toner, 99
When A is displayed
, 104
When a message is displayed
on the client computer
, 83
When B is displayed
, 104
When certain settings are required
on the printer driver
, 49, 77
When C is displayed
, 104
When D is displayed
(when bridge unit is installed)
, 107
When paper is not fed properly
, 49, 77
When P is displayed
, 105
When R is lit (when finisher is installed)
, 106
When Y is displayed
, 105
When you cannot print clearly
, 49, 77
When Z is displayed
, 106
To Next Page
Loading...
