Getting Started
20
1
25. {Original} key (copier, scanner
and facsimile mode)
Press to select the most suitable scanning
method for the original. See “Original
Type Setting”, Copy Reference, “Select-
ing Original Type”, Scanner Reference,
and “Original Type”, Facsimile Reference.
26. {Escape} key
Press to cancel operation or return to the
previous display.
27. {Lighter} key, {Darker} key (copi-
er, scanner and facsimile mode)
Press to adjust the scanning density un-
der the copier, fax and scanner functions.
28. {Sort} key (finisher not installed
- copier mode) / {Sort/Staple} key (fin-
isher installed - copier mode)
•Sort
Automatically sorts printed copies.
See “Sort” and “Rotate Sort”, Copy
Reference.
•Staple
Automatically staples multiple-page
copies. See “Staple”, Copy Reference.
•Stack
Groups together copies of each page
in a multi-page original. See “Stack”,
Copy Reference.
29. {Duplex} key (copier mode)
Press to make two-sided copies. See “Du-
plex”, Copy Reference.
30. {Combine/Series} key (copier
mode)
•Combine
Combines and prints the pages of a
multiple-sheet original onto a single-
sheet. See “One-Sided Combine” and
“Two-Sided Combine”, Copy Reference.
•Series
Copies each side of a two-sided original
onto two sheets. See “Series Copies”,
Copy Reference.
31. mData In indicator (facsimile
and printer mode)
Flashes when the machine is receiving
print jobs or LAN-Fax documents from a
computer. See Facsimile Reference and
Printer Reference. (For machines with the
DDST Unit, see Printer/Scanner Reference.)
32. {fOnline} key (printer mode)
Press to switch between on-line and off-
line modes.
33. Quick Dial keys
Press to enter letters and symbols. See
“Entering Text”. Press to select the regis-
tered destination at a single touch. See
Facsimile Reference and Scanner Reference.
34. Quick Dial Flip Plate
Flip the plate downward to change from the
{Quick Dial 01} key to the {Quick Dial 16} key.
Flip the plate upward to change from the
{Quick Dial 17} key to the {Quick Dial 32} key.
35. {Immediate Trans./Memory Trans.}
key (facsimile mode)
Press to toggle between Memory Trans-
mission (Memory Trans.) and Immediate
Transmission (Immediate Trans.) modes.
See “Memory Transmission”, Facsimile
Reference.
36. {Resolution} key (facsimile
mode)
Press to specify the resolution of the fax.
See “Resolution”, Facsimile Reference.
37. User Function keys (facsimile
mode)
You can assign frequently-used functions
to these keys. See “General Settings/Ad-
just”, General Settings Guide.
By default, the following functions are
registered:
{F1} key: Start Manual Reception
{F2} key: Switch RX Mode
{F3} key: Transmission Stamp
To Next Page
Loading...
