Copy Functions
63
2
C Select the original orientation using {U} or {T}, and then press the {OK}
key.
The “
Programmed” message appears.
Proceed to step
E
.
D Select the paper size using {U} or {T}.
E Place the originals, and then press the {Start} key.
Note
❒ To cancel the Series Copies function in step
A
, press the {Combine/Series}
key again. Make sure the indicator goes off.
❒ To display the screen in step
C
, select [Always Specify] for [Orientation] with
Copier Features in User Tools. If [Do not Specify] is selected, proceed to step
D
.
Reference
“Copier Features: Orientation”, General Settings Guide
To Next Page
Loading...
