Registering Addresses and Users for Facsimile/Scanner Functions
204
7
Programming the SUB Code
This section describes how to program the SUB Code.
A Press [Adv. Features], and then press [SUB Code].
B Press [Change] under TX SUB Code.
C Enter the SUB Code, and then press [OK].
D To enter the password, press [Change] under Password (SID).
E Enter the password, and then press [OK].
F Press [OK].
Programming the SEP Code
This section describes how to program the SEP Code.
A Press [Adv. Features], and then press [SEP Code].
B Press [Change] under RX SEP Code.
C Enter the SEP Code, and then press [OK].
D To enter the password, press [Change] under Password (PWD).
E Enter the password, and then press [OK].
F Press [OK].
Setting the International TX Mode
This section describes how to set the International TX Mode.
A Press [Change] under International TX Mode.
B Select [Off] or [On], and then press [OK].
Selecting the Fax Header
This section describes how to select the fax header.
You can register the fax header in Program Fax Information in the system set-
tings for Facsimile Features.
A Press [Change] under Fax Header.
B Select [1st Name] or [2nd Name], and then press [OK].
Reference
p.112 “Registering Fax Information”
To Next Page
Loading...
