• If the machine is capable of executing multiple functions simultaneously, specify which function should
have priority in “Print Priority”. This setting is factory-preset to “Display Mode”. For details about Print
Priority, see “System Settings”, General Settings Guide.
• When the 1000-sheet finisher, the 3000-sheet finisher, or the booklet finisher is installed on the
machine, you can specify the output tray where documents are delivered. For details about Output
Tray Settings, see “System Settings”, General Settings Guide.
• While printing is in progress, scanning a document using another function may take longer than usual.
1. When the Machine Does Not Operate As Wanted
20
To Next Page
Loading...
