Ricoh Aficio MP 4000 User Manual

Re-entering a fax number to confirm destination
Enter the fax number again to confirm the destination is correct.
Transmission is disabled if the confirmation fax number does not match the first fax number. This function
helps prevent users accidentally sending faxes to the wrong destination.
If you want to enable this function, contact your service representative.
• When using this function, you must press [Manual Entry] on the standby display to enter the fax number.
1. Press [Manual Entry].
2. Enter the fax number using the number keys, and then press [OK].
If you make a mistake, press [Clear], and then enter the number again.
1. Transmission
80
1

Ricoh Aficio MP 4000 Specifications