1. Press [Edit / Stamp].
2. Press [Erase].
3. Press [Erase Center / Border].
4. Press [Erase Center / Border].
5. Press [Same Width].
6. Press [Center], and then specify the erase width with [ ] and [ ].
7. Press [Border], and then specify the erase width with [ ] and [ ].
8. Press [OK] twice.
• To change the value you entered, press [ ] and [ ], and then specify a new value.
Erase Center / Border (different width)
Erases both the center and edge margins of the original image.
3. Advanced Copying
124
To Next Page
Loading...
