3. Select the scan settings you require.
For details about the scan settings, see “Scan Settings”.
4. Using the number keys or a Destination key, specify a destination.
If you make a mistake, press the [Clear/Stop] key, and then enter the correct number.
For details about specifying a destination, see “Specifying a Destination”.
5. Press the [Start] key.
The machine dials a destination.
• Documents are not stored in memory.
• p.59 "Scan Settings"
• p.77 "Specifying a Destination"
Sending originals using the exposure glass (Immediate Transmission)
This section explains how to send originals by Immediate Transmission using the exposure glass.
1. Press [Immed. TX].
2. Place the first page face down on the exposure glass.
1. Transmission
28
To Next Page
Loading...
