3. Press [Print Memory Lock].
If no documents were received while Memory Lock Reception was switched on, the message "No
reception file." is shown. Press [Exit].
4. Enter a 4-digit Memory Lock ID with the number keys, and then press the [Start] key.
If you make a mistake, press [Clear], and then try again.
To cancel printing, press [Cancel].
If the Memory Lock ID does not match, the "Specified code does not correspond to programmed
Memory Lock ID." message appears. Press [Exit] and retry after checking the Memory Lock ID.
5. Press [Exit].
The standby display appears.
• If Memory Lock Reception and received document storage are both set to on, Memory Lock Reception
is unavailable and received documents become stored documents.
• Even when Memory Lock Reception is available, if free memory is insufficient, reception is not possible.
• You can also apply a Memory Lock Reception to documents that come only from certain senders.
• Documents received by SEP Code Reception are automatically printed even if this function is switched
on.
• You can program one of the Quick Operation keys with operations for this function. Using the key
allows you to omit step 2 and 5. For details about Quick Operation Key, see “Facsimile Features”,
General Settings Guide.
• If you print a Memory Lock File, it is deleted.
4. Changing/Confirming Communication Information
248
To Next Page
Loading...
