Removing Jammed Staples
This section describes how to remove jammed staples.
• Keep your hands clear of the booklet finisher tray when pulling out or pushing in the finisher's staple
unit. You can trap your fingers if you do not.
• Curled paper may cause staples to jam. To avoid this, turn paper over in the tray.
• When the finisher is installed, after removing jammed staples, staples will not be ejected the first few
times you try to use the stapler.
• Remove the jammed staples according to the finisher type. Check the type if you are unsure. For details
about type of finisher, see "Appendix", About This Machine .
Finisher SR4030 / SR4040
This section describes how to remove jammed staples from the Finisher SR4030 and SR4040.
To Next Page
Loading...
Need help?
General
