Ricoh Aficio MP 8001 Troubleshooting Guide

Removing Staple Waste
This section describes how to remove staple waste.
Finisher SR4050
The following procedure describes how to remove staple waste from the Finisher SR4050.
• While "Waste Staple Receptacle is full." is displayed, you cannot use the Staple function.
• "Waste Staple Receptacle is full." is displayed until the staple waste box is reinstalled.
• If the message is still displayed, reinstall the staple waste box.
1. Open the finisher front cover.
BQN023S
2. Pull out the staple waste box carefully, and then remove staple waste.
BQN026S
6. Clearing Misfeeds
144
6

Ricoh Aficio MP 8001 Specifications

General

Brand	Ricoh
Model	Aficio MP 8001
Category	All in One Printer
Language	English