Problem Cause Solution
[Prg. Dest.] or [Manual Entry]
does not appear.
This function is made
unavailable by the enhanced
security function.
Contact the administrator.
The following functions are
not available: Forwarding,
Store File in the Information
Box, routing e-mail received
via SMTP.
This function is made
unavailable by the enhanced
security function.
Contact the administrator.
Cannot print JPEG format files
with the Mail to Print function.
Only JFIF files are printable.
(JFIF is a JPEG subformat.)
Make sure the files you are trying to print
are in JFIF subformat.
When Memory Is Full
This section describes likely causes of and possible solutions for problems related to full memory.
Message Cause Solution
"Memory is full. Cannot scan
more. Transmission will be
stopped."
The memory is full. If you press [Exit], the machine returns to
standby mode and starts transmitting the
stored pages.
Check the pages that have not been sent
using the Communication Result Report,
and then resend those pages.
3. Troubleshooting When Using the Facsimile Function
66
To Next Page
Loading...
Need help?
General
