Ricoh Aficio MP 8001 Troubleshooting Guide

Removing Punch Waste
This section describes how to remove punch waste.
Finisher SR4030 / SR4040
The following procedure describes how to remove punch waste from the Finisher SR4030 and Finisher
SR4040.
• While "Hole Punch Receptacle is full." is displayed, you cannot use the Punch function.
• "Hole Punch Receptacle is full." is displayed until the punch waste box is reinstalled.
• If the message is still displayed, reinstall the punch waste box.
1. Open the finisher front cover.
BQN022S
2. Pull out the punch waste box carefully, and then remove punch waste.
BQM003S
Removing Punch Waste
141
6

Ricoh Aficio MP 8001 Specifications

General

Brand	Ricoh
Model	Aficio MP 8001
Category	All in One Printer
Language	English