Problem Cause Solution
The machine cancels
Connect Copy.
The sub-machine's main
power is off.
A message instructing you to check the
sub-machine appears on the display of
the main machine. Press [Cancel] to
clear Connect Copy. Turn on the sub-
machine's main power, press Connect
Copy, and then make your settings
again.
The machine cancels
Connect Copy.
The Weekly Timer setting is
coming into effect on the main
machine.
Turn on the main machine's operation
switch, and then press [Connect Copy].
For details about Weekly Timer:
Monday - Sunday, see "System
Settings", Network and System Settings
Guide .
An error message indicates
the main machine has broken
down.
The is lit. Copying is not possible. Follow the
instructions displayed.
If You Cannot Exit from Connect Copy
This section describes causes and remedies if you cannot exit from Connect Copy.
Problem Cause Solution
There is no response when
you press [Connect Copy].
Scanning is in progress. Press the [Clear/Stop] key on the main
machine, and then press [Stop].
There is no response when
you press [Connect Copy].
Copying is in progress. Press the [Clear/Stop] key on the main
machine, and then press [Stop].
2. Troubleshooting When Using the Copy/Document Server Function
44
To Next Page
Loading...
Need help?
General
