Message Cause Solution
"The selected file(s)
contained file(s) without
access privileges. Only file(s)
with access privileges will be
deleted."
You have tried to delete files
without the authority to do so.
Files can be deleted by the person who
created the file. To delete a file which
you are not authorized to delete, contact
the person who created the file.
"The tray selected for other
pages is the same as the one
for Slip Sheets ([Designate]).
Cannot print. Check the
setting."
The tray selected for other
pages is the same as the one
for slip sheets.
Reset the job. Be sure the tray you select
for slip sheets is not providing paper for
other pages.
"Updating the destination
list... Please wait. Specified
destination(s) or sender's
name has been cleared."
The destination list is being
updated from the network
using SmartDeviceMonitor
for Admin or Web Image
Monitor.
Wait until the message disappears. Do
not switch off the power while this
message is displayed. Depending on the
number of destinations to be updated,
there may be some delay before you
can resume operation. Operations are
not possible while this message is
displayed.
"You do not have the
privileges to use this function."
The logged in user name does
not have permission for the
selected function.
Contact the administrator about the
permission for the required function.
Other Messages
This section describes likely causes of and possible solutions for the error messages that are printed on the
error logs or reports.
Message Cause Solution
"84: Error" There is no work area
available for image
processing.
• In [Printer Features], under
[System], set [Memory Usage] to
[Font Priority].
• Decrease the number of files sent to
the machine.
"85: Error" The specified graphics library
is unavailable.
Check that the data is valid.
4. Troubleshooting When Using the Printer Function
78
To Next Page
Loading...
Need help?
General
