Message Cause Solution
"Hardware Problem: USB" An error has occurred in the
USB interface.
Turn the main power switch off, and
back on again. If the message appears
again, contact your service
representative.
"Hardware Problem:
Wireless Board"
Access to the wireless board
in which the wireless LAN
interface unit is inserted is
possible, but an error was
detected.
Turn off the machine, and check the
wireless board is inserted correctly.
Then, turn the machine on again. If the
message appears again, call your
service representative.
"Hardware Problem:
Wireless Card"
• The installed wireless
LAN or Bluetooth card is
not compatible with this
machine.
• An error has occurred in
either the wireless LAN
or Bluetooth card.
Turn off the machine, and check the
wireless card. Then, turn the machine on
again. If the message appears again,
call your service representative.
"IPDS font error. Turn the main
power switch off then on.
Press [Reset IPDS Fonts] in
Printer Features."
An IPDS font error occurred. Contact the machine administrator.
"Load following paper in n."
"To cancel job, press [Job
Reset]."
(A figure is placed at n)
The printer driver settings are
incorrect or the tray does not
contain paper of the size
selected in the printer driver.
Check the printer driver settings are
correct, and then load paper of the size
selected in the printer driver into the input
tray. For details about how to change the
paper size, see "Changing the Paper
Size", About This Machine .
"Paper size and type are
mismatched. Select another
tray from the following and
press [Continue]. To cancel
job, press [Job Reset]. Paper
size and type can also be
changed in User Tool."
The printer driver settings are
incorrect or the tray does not
contain paper of the size or
type selected in the printer
driver.
Check the printer driver settings are
correct, and then load paper of the size
selected in the printer driver into the input
tray. For details about how to change the
paper size, see "Changing the Paper
Size", About This Machine .
"Problem: Printer Font Error" An error has occurred in the
font settings.
Contact your service representative.
Messages Displayed When Using the Printer Function
77
To Next Page
Loading...
Need help?
General
