1. On the control panel, press [System Status].
2. Press each tab and check the contents.
3. After checking the information, press [Exit]. The previous screen returns.
• [No Staples], [Punch Receptacle Full], [Waste Staple Receptacle Full], [Output Tray Full], [Original
Misfeed], [Paper Misfeed], and [Cover Open] appear on the [Maintenance Info] tab only when these
errors occur.
• For details about how to locate and remove misfeeds, see "Removing Jammed Paper".
• p.121 "Removing Jammed Paper"
Checking Machine Status and Settings
17
To Next Page
Loading...
Need help?
General
