• If the machine is capable of executing multiple functions simultaneously, specify which function should
have priority in "Print Priority". This setting is factory-preset to "Display Mode". For details about Print
Priority, see "General Features", Network and System Settings Guide .
• When Finisher SR4030, Finisher SR4040, or Finisher SR4050 is installed on the machine, you can
specify the output tray where documents are delivered. For details about Output Tray Settings, see
"General Features", Network and System Settings Guide .
• While printing is in progress, scanning a document using another function may take longer than usual.
1. When the Machine Does Not Operate As Wanted
26
To Next Page
Loading...
Need help?
General
