Message Cause Solution
"Memory is full. nn originals
have been scanned. Press
[Print] to copy scanned
originals. Do not remove
remaining originals."
"n" in the message represents
a changeable number.
The scanned originals
exceeds the number of pages
that can be stored in memory.
Press [Print] to copy scanned originals
and cancel the scanning data. Press
[Stop] to cancel the scanning data and
not copy.
"Press [Continue] to scan and
copy remaining originals."
The machine checked if the
remaining originals should be
copied, after the scanned
originals were printed.
To continue copying, remove all copies,
and then press [Continue]. To stop
copying, press [Stop].
Connect Copy
Message Cause Solution
"Sub-machine memory is full.
Sub-machine will be
disconnected."
The quantity of data exceeds
the capacity of the sub-
machines.
Continue printing on the main machine.
• If you set [Memory Full Auto Scan Restart] in [Input / Output] of User Tools to [On], even if the memory
becomes full, the memory overflow message will not be displayed. The machine will make copies of
the scanned originals first, and then automatically proceed to scan and to copy the remaining
originals. In this case, the resulting sorted pages will not be sequential. For details about Memory Full
Auto Scan Restart, see "Input/Output", Copy and Document Server Reference .
2. Troubleshooting When Using the Copy/Document Server Function
46
To Next Page
Loading...
Need help?
General
