Form Feed
This section gives instructions for operating the machine when there is no tray for the selected paper size
or type, or when paper loaded in the machine has run out.
• The tray cannot be changed if the following functions are set:
• Duplex Print to a tray that does not support duplex printing
• If form feed is selected for a tray with the following settings, you can change the tray by canceling
the settings:
• Duplex
• If Auto Continue is selected, form fed paper is printed after a set interval. See "Printer Features".
• p.109 "Printer Features"
Printing from a Selected Tray
If the machine does not have a tray for the selected paper size or paper type, or if the selected paper
loaded in the machine has run out, a caution message appears. If this message appears, do the following
procedure.
1. When the caution message appears, press [FormFeed].
A confirmation message appears.
2. Press [OK].
3. Select the tray for form feed using the [ ] or [ ] key from those that appear on the display,
and then press the [OK] key.
Form Feed
75
To Next Page
Loading...
Need help?
General
