Display
This section describes configuration using the display when the printer function is selected.
• Do not touch the display.
The following screen appears when you turn on the printer.
1. Operational Status or Messages
Displays the printer status or the messages.
2. [JobReset]
Press to cancel the current print job. If you press it when the machine is offline and Hex Dump is selected,
Hex Dump is canceled.
3. [Menu]
Press to display the menu to select the following options:
• Form Feed
Prints all the data left in the machine's input buffer.
• Show Error Log
Displays the error logs of print jobs that are sent from a computer.
Reading the Display and Using Keys
This section explains how to read the display and using the selection key for the initial display.
11
To Next Page
Loading...
