Troubleshooting When Using the Copy Function
18
2
Cannot punch
this paper size.
The Punch function cannot be
used with paper size selected.
The following paper sizes are
available for Punch mode: A3L,
B4L, A4KL, B5KL, A5K,
11"×17"L, Legal(8
1
/
2
"×14")L,
Letter(8
1
/
2
"×11")KL, Half Let-
ter (5
1
/
2
"×8
1
/
2
"), Excecutive
(7
1
/
4
"×10
1
/
2
")KL,F/GL
(8"×13")K, Foolscap (8"×13")L,
Folio (8
1
/
4
"×13")L
,8KL,16KKL. Select one of
these sizes.
Stapling capaci-
ty exceeded.
The number of sheets per set is
over the staple capacity.
Check the stapler capacity. See
"Supplementary Informations",
Copy/Document Server Refer-
ence.
Cannot staple
paper of this
size.
The Staple function cannot be
used with paper size selected.
Select a paper size that can be
used in Staple mode. See "Supple-
mentary Informations",
Copy/Document Server Refer-
ence.
Duplex is not
available with
this paper size.
A paper size not available in Du-
plex mode has been selected.
The following paper sizes are
available for Duplex mode: A3L,
B4L, A4KL, B5KL, A5K,
11"×17"L, Legal(8
1
/
2
"×11")L,
Letter(8
1
/
2
"×11")LK,Half Letter
(5
1
/
2
"×8
1
/
2
")L,Excecutive
(7
1
/
4
"×10
1
/
2
")KL,F/GL
(8"×13")K, Foolscap(8"×13")L,
Folio(8
1
/
4
"×13")L, 8KL,
16KKL. Select one of these siz-
es.
Maximum number
of sets is nn.
(A figure is placed at n.)
The number of copies exceeds the
maximum copy quantity.
You can change the maximum
copy quantity. See "Max. Number
of Sets", General Settings Guide.
File being
stored exceeded
max. number of
pages per file.
Copying will be
stopped.
The scanned originals have too
many pages to store as one docu-
ment.
Press [Exit], and then store again
with an appropriate number of
pages.
Magazine or
Booklet mode is
not available
due to mixed im-
age mode.
You selected the Magazine or
Booklet function for originals
scanned using different func-
tions, such as copy and printer.
Make sure originals for the Mag-
azine or Booklet function are
scanned using the same function.
Message Cause Solution
To Next Page
Loading...
