When a Message Appears
19
2
Reference
p.8 “When You Have Problems Operating the Machine”
Orig. is being
scanned by an-
other function.
Please wait.
Document Server or Scanner
function is in use.
To cancel the job in process, press
[Exit], and then press the {Docu-
ment Server} or {Scanner} key.
Next, press the {Clear/Stop} key.
When the message "
The Clear
/ Stop key was pressed.
Are you sure you want
to stop scanning?
" ap-
pears, press [Cancel].
You do not have
the privileges
to use this
function.
This user code is not allowed to
use the function selected.
Contact the administrator.
You do not have
the privileges
to use this
function.
This user code is not allowed to
use the function selected.
If the message continues to be
displayed and you cannot switch
the screen, press the {Energy Sav-
er} key. Confirm that the display
goes off, and then press the {Ener-
gy Saver} key again. The display
will return to the user code entry
display. When printing under the
copier or printer function, press
{Energy Saver} only after printing
has finished.
Authentication
has failed.
The entered login user name or
login password is not correct.
Inquire the user administrator for
the correct login user name and
login password.
Authentication
has failed.
The machine cannot perform au-
thentication.
Contact the administrator.
The selected
file(s) con-
tained file(s)
without access
privileges. Only
file(s) with ac-
cess privileges
will be deleted.
You have tried to delete files
without the authority to do so.
Files can be deleted by the person
who created the file. To delete a
file which you are not authorized
to delete, contact the person who
created the file.
Please wait.
The destination list is being up-
dated from the network using
SmartDeviceMonitor for Admin.
Depending on the number of des-
tinations to be updated, there
may be some delay before you
can resume operation. Opera-
tions are not possible while this
message is displayed.
Wait until the message disap-
pears. Do not switch off the pow-
er while this message is
displayed.
Message Cause Solution