When a Message is Displayed
73
5
Entered protec-
tion code for
destination is
incorrect.
Please re-enter.
The correct protect destination
code was not entered.
Make sure the protection code is
correct, and then enter it again.
See "Registering a Protection
Code", General Settings Guide.
Entered user
code is not cor-
rect.
The entered password is incor-
rect.
Check the authentication setting,
and then specify a correct pass-
word.
Exceeded max.
number of alpha-
numeric charac-
ters.
The maximum enterable number
of alphanumeric characters has
been exceeded.
Make sure the maximum number
of characters which can be en-
tered, and then enter it again. See
"Values of various set items for
transmission/storage/delivery
function", Scanner Reference.
Authentication
has failed.
The entered login user name or
login password is incorrect.
Check the login user name and
login password. The machine is
unable to authenticate. Contact
an administrator.
The entered path
is not correct.
Please re-enter.
The entered path format is incor-
rect.
Confirm the destination compu-
ter and the path, and then enter it
again.
Captured file
exceeded max.
number of pages
per file. Cannot
send the scanned
data.
The maximum number of pages
per file has been exceeded.
Reduce the number of pages in
the transmitted file, and then re-
send the file. See "Storage func-
tion", Scanner Reference.
Original is be-
ing scanned by
another func-
tion. Please
wait.
The machine is using another
function such as copying.
Retry scanning after the opera-
tion with the other function is
completed.
E-mail address
entered is not
correct. Please
re-enter.
The entered e-mail address is in-
correct.
Make sure the e-mail address is
correct, and then enter it again.
Memory is full.
Scanning has
been cancelled.
Press [Send] to
send the scanned
data, or press
[Cancel] to de-
lete.
Because there is not enough free
hard disk space in the machine
for delivering or sending by e-
mail while storing in the Docu-
ment Server, only some of the
pages could be scanned.
Specify whether to use the data or
not.
Message Cause Solution
To Next Page
Loading...
