Troubleshooting When Using the Scanner Function
72
5
Transmission has
failed. To check
the current sta-
tus, press
[Scanned Files
Status].
While a file was being sent, a net-
work error occurred and the file
could not be sent correctly.
Try the operation once more. If
the message is still shown, the
network may be crowded. Con-
tact the administrator. If multiple
files were sent, use the Scanned
Files Status screen to check for
which file the problem occurred.
Transmission has
failed. Insuffi-
cient memory in
the destination
hard disk. To
check the cur-
rent status,
press [Scanned
Files Status].
Transmission has failed. There
was not enough free space on the
hard disk of the SMTP server,
FTP server, or client computer at
the destination.
Allocate sufficient space.
Output buffer is
full. Sending
the data has
been cancelled.
Please try again
later.
Too many jobs are in standby
state, and sending was cancelled.
Retry sending after sending jobs
in standby state completes.
Exceeded max.
number of pages
per file. Do you
want to store
the scanned pag-
es as 1 file?
The file being stored has exceed-
ed the max. number of pages for
one file.
Specify whether to use the data or
not. Scan the pages that were not
scanned and store them as a new
file. See Storing Files Using the
Scanner Function Scanner Refer-
ence.
Exceeded maximum
number of file
to store. Delete
all unnecessary
files.
Too many files are waiting to be
delivered.
Please try again after they have
been delivered.
Exceeded max.
number of stored
files. Cannot
send the scanned
data as captur-
ing files is un-
available.
Too many files are waiting to be
delivered.
Please try again after they have
been delivered.
Exceeded max.
number of files
which can be
used in Document
Server at the
same time.
The maximum number of files
that can be stored in the docu-
ment server has been exceeded.
Check the files stored by the other
functions, and then delete un-
needed files. See "Document
Server", Copy/Document Server
Reference.
Message Cause Solution
To Next Page
Loading...
