Ricoh Aficio MP C4502 General Settings Guide

Registering Folders
233
7
J Press [Exit].
Note
❒ To change the name, key display and title, see “Changing a Registered Name”.
Reference
p.196 “Changing a Registered Name”
p.233 “Changing the protocol”
Changing the protocol
This section describes how to change the protocol.
A Press [SMB], or [NCP].
B A confirmation message appears. Press [Yes].
Changing the protocol will clear all settings made under the previous protocol.
C Enter each item again.
Reference
p.223 “Registering a SMB Folder”
Changing the registered FTP folder
This section describes how to change the registered FTP folder.
A Press [Change] under "Port No".
B Enter the new port number, and then press the {q} key.
C Press [Change] under "Server Name".
D Enter the new server name, and then press [OK].
E Press [Change] under "Path".
F Enter the new path, and then press [OK].

Ricoh Aficio MP C4502 Specifications

General

Print Technology	Laser
Maximum Print Resolution	1200 x 1200 dpi
Maximum Paper Capacity	4, 400 sheets
Automatic Duplexing	Yes
Maximum Scan Resolution	600 dpi
Fax Capability	Optional
Maximum Paper Size	12" x 18"
Memory (Standard)	1.5 GB
Hard Drive	250 GB
Copy Resolution	600 x 600 dpi
Print Speed	45 ppm
Standard Paper Capacity	1, 200 sheets
Scanner Type	Flatbed, ADF
Network Connectivity	Ethernet
Functions	Print, Copy, Scan
Copy Speed	Up to 45 ppm (Black/Color)
Fax Speed	33.6 kbps
Operating System Compatibility	Windows, Mac, Linux