Ricoh Aficio MP C4502 General Settings Guide

System Settings
62
2
❖ Program / Change / Delete Subject
You can program, change, or delete the subject used when sending an Inter-
net fax or scan file as an attachment.
Program / Change:
A Press [System Settings].
B Press [File Transfer].
C Press [TNext].
D Press [Program / Change / Delete Subject].
E Press [*Not Programmed].
To change the registered subject, select the subject to change.
F Enter the text, and then press [OK].
Enter the subject using up to 20 characters.
G Press [Exit].
Delete:
A Press [System Settings].
B Press [File Transfer].
C Press [TNext].
D Press [Program / Change / Delete Subject].
E Press [Delete].
F Select the subject to delete.
The confirmation message about deleting appears.
G Press [Yes].
H Press [Exit].
❖ Scanner Recall Interval Time
Specifies the interval the machine waits before resending a scan file, if it can-
not be sent to the delivery server or mail server.
The default setting is 300 seconds.
The interval time can be set from 60 to 900 seconds in one second increments,
using the number keys.
This setting is for the scanner function.
❖ Number of Scanner Recalls
Sets a maximum number of times a scan file is resent to the delivery server or
mail server.
The default setting is On, 3 time(s).
If [On] is selected, the number of times can be set from 1 to 99. This setting is
for the scanner function.
This setting is for the scanner function.

Ricoh Aficio MP C4502 Specifications

General

Print Technology	Laser
Maximum Print Resolution	1200 x 1200 dpi
Maximum Paper Capacity	4, 400 sheets
Automatic Duplexing	Yes
Maximum Scan Resolution	600 dpi
Fax Capability	Optional
Maximum Paper Size	12" x 18"
Memory (Standard)	1.5 GB
Hard Drive	250 GB
Copy Resolution	600 x 600 dpi
Print Speed	45 ppm
Standard Paper Capacity	1, 200 sheets
Scanner Type	Flatbed, ADF
Network Connectivity	Ethernet
Functions	Print, Copy, Scan
Copy Speed	Up to 45 ppm (Black/Color)
Fax Speed	33.6 kbps
Operating System Compatibility	Windows, Mac, Linux