• To change the name, key display and title, see "Changing a Registered Name".
• p.139 "Changing a Registered Name"
• p.156 "To locate the SMB folder manually"
• p.157 "To locate the SMB folder using Browse Network"
To change the protocol
This section describes how to change the protocol.
1. Press [FTP] or [NCP].
A confirmation message appears.
2. Press [Yes].
Changing the protocol will clear all settings made under the previous protocol.
3. Enter each item again.
• p.160 "Using FTP to Connect"
• p.165 "Using NCP to Connect"
Deleting an SMB registered folder
This section describes how to delete the registered SMB folder.
Registering Folders
159
To Next Page
Loading...
