SC No. Level Error Name/Error Condition/Major Cause/Solution
SC990-00 D
Software performance error
The software attempted to make an unexpected operation.
• Incorrect argument
• Incorrect internal parameter
• Insufficient working memory
• Abnormal performance caused by an error that cannot be detected
in normal SC detection due to hardware specifications.
• Turn the main power switch off and on.
• Reinstall the software of the controller board.
• Reinstall the software of the engine board.
SC No. Level Error Name/Error Condition/Major Cause/Solution
SC991-00 C
Software continuity error
The software has attempted to perform an unexpected operation.
(However, the process can continue running if recovery processing is
carried out.)
• Incorrect argument
• Incorrect internal parameter
• Insufficient working memory
• May have resulted from an error that cannot be detected by the
hardware using normal SC detection.
Not required
SC No. Level Error Name/Error Condition/Major Cause/Solution
SC992-00 D
Undefined SC error
An error that is not controlled by the system occurred (the error does not
come under any other SC code).
A SC code used in the previous machine was applied erroneously.
Turn the main power switch off and on.
Service Call
143
To Next Page
Loading...
