Ricoh Aficio MP171 - Registration Adjustment; Print Area

• [1]: Print area
• [2]: Paper feed direction
1. Print the test sheet. (page 150 "Test Sheet Printing")
2. Adjust the blank margin width of the image with SP2-103-(001-004).
• Leading edge: 2.7 to 9.9 mm (Default: 3.0 mm)
• Trailing edge: 0.0 to 9.9 mm (Default: 2.0 mm)
• Left: 0.0 to 9.9 mm (Default: 2.0 mm)
• Right: 0.0 to 9.9 mm (Default: 2.0 mm)
Registration Adjustment
Print Area
Check that the adjustment meets the product specification.
Troubleshooting
151