Main SP Tables-1
SP1-XXX (Feed)
1001
[User Lead Edge Reg]
Adjusts the leading edge registration by changing the registration motor operation
timing for each mode.
• Increasing a value: an image is moved to the trailing edge of paper.
• Decreasing a value: an image is moved to the leading edge of paper.
1-001-001 By-pass E
[-4.0 to 4.0 / 0.0 / 0.1 mm/step]
1-001-002 Tray 1 E
1-001-003 Tray 2 E
1-001-006 Duplex E
1002
[User S-to-S Reg]
Adjusts the printing side-to-side registration from each paper feed station, using the
Trimming Area Pattern.
• To move the start position to the right, increase the value (+).
• To move the start position to the left, decrease the value (–).
1-002-001 By-pass E
[-4.0 to 4.0 / 0.0 / 0.1 mm/step]
1-002-002 Tray 1 E
1-002-003 Tray 2 E
1-002-006 Duplex E
3. Appendices: SP Mode Tables
20
To Next Page
Loading...
