Troubleshooting
Test Sheet Printing
Press the [Menu] key, and then select the setting items using the [ ] or [ ] key.
1. Select [System Settings]
Press [OK]
2. Select [Maintenance] Press [OK]
3. Select [Registration] Press [OK]
4. Select [Print Test Sheet] Press [OK]
5. Select the tray you want to adjust Press [OK]
6. Print the test sheet to preview the settings.
Use this sheet to check the current print position.
Image Position Adjustment
• Adjust the blank margin width only if it cannot be adjusted by registration (leading edge/side-to-
side). First adjust C and D; then A and B.
6. Troubleshooting
150
To Next Page
Loading...
