5-816-067
Cer Updt Cond C
[ - / - / - ]
Displays the status of the certification update.
0 The certification used by Embedded RC Gate is set correctly.
1
The certification request (setAuthKey) for update has been received from the
GW URL and certification is presently being updated.
2
The certification update is completed and the GW URL is being notified of
the successful update.
3
The certification update failed, and the GW URL is being notified of the
failed update.
4
The period of the certification has expired and new request for an update is
being sent to the GW URL.
11
A rescue update for certification has been issued and a rescue certification
setting is in progress for the rescue GW connection.
12
The rescue certification setting is completed and the GW URL is being
notified of the certification update request.
13
The notification of the request for certification update has completed
successfully, and the system is waiting for the certification update request
from the rescue GW URL.
14
The notification of the certification request has been received from the
rescue GW controller, and the certification is being stored.
15
The certification has been stored, and the GW URL is being notified of the
successful completion of this event.
16
The storing of the certification has failed, and the GW URL is being notified
of the failure of this event.
17
The certification update request has been received from the GW URL, the
GW URL was notified of the results of the update after it was completed, but
a certification error has been received, and the rescue certification is being
recorded.
18
The rescue certification of No. 17 has been recorded, and the GW URL is
being notified of the failure of the certification update.
3. Appendices: SP Mode Tables
52
To Next Page
Loading...
