Operation Error,Incorrect
Setting
-12003
Attempted registration without
execution of an inquiry and no
previous registration.
-12004
Attempted setting with illegal entries
for certification and ID2.
-12006
A confirmation request was made after
the confirmation had been already
completed.
-12008
Update certification failed because
mainframe was in use.
Error Caused by Response
from GW URL
-2387 Not supported at the Service Center
-2389 Database out of service
-2390 Program out of service
-2391 Two registrations for same device
-2392 Parameter error
-2393 Basil not managed
-2394 Device not managed
-2395 Box ID for Basil is illegal
-2396 Device ID for Basil is illegal
-2397 Incorrect ID2 format
-2398 Incorrect request number format
5-816-209 Instl Clear C
[- / - / -]
[Execute]
Releases the machine from its
embedded RCG setup.
5818
[Network Setting]
-
5-818-010 Print Time Out C
[5 to 300 / 15 / 1/step]
Sets timeout time for DIPRINT or LPR printing.
3. Appendices: SP Mode Tables
58
To Next Page
Loading...
