Ricoh D127 - Page 262

System Service Mode
D127/D128 3-6 SM Appendix
1124 16
High: 2nd CPM Down Time.: B5 [0 to 999 / 1 / 1 sec/step]
1124 17
High: 3rd CPM Down Time.: B5 [0 to 999 / 0 / 1 sec/step]
1124 18
High: 1st CPM Down Time.: A5 [0 to 999 / 60 / 1 sec/step]
1124 19
High: 2nd CPM Down Time.: A5 [0 to 999 / 0 / 1 sec/step]
1124 20
High: 3rd CPM Down Time.: A5 [0 to 999 / 0 / 1 sec/step]
1124 21
High: 1st CPM Down Time.: A6 [0 to 999 / 60 / 1 sec/step]
1124 22
High: 2nd CPM Down Time.: A6 [0 to 999 / 1 / 1 sec/step]
1124 23
High: 3rd CPM Down Time.: A6 [0 to 999 / 0 / 1 sec/step]
1124 24
Judging Interval [1 to 999 / 10 / 1 sec/step]
For CPM down (Low temp.)
1124 25
Start Timing [1 to 999 / 10 / 1 sec/step]
After motor driving start, CPM down judge starts in SP’s value sec later. (Low
temp.)
1152 Fusing Nip Band Check By-pass
1152 1
Check By-pass
Execution type SP
1152 2
Pre-idling Time [0 to 999 / 300 /1 sec/step]
Sets the duration of idling before the check takes place.
1152 3
Stop Time [0 to 100 / 20 / 1 sec/step]
Sets the duration of the check.