Ricoh MP 2001 - Page 55

3. Select the envelope size from [C6 Env ], [C5 Env ], or [DL Env ], and then press the
[OK] key.
The "Programmed" message appears.
4. Press the [ ] key.
5. Select [Paper Type] using the [ ] or [ ] key, and then press the [OK] key.
6. Select [Thick Paper] using the [ ] or [ ] key, and then press the [OK] key.
The "Programmed" message appears.
4. Place your originals, and then press the [Start] key.
• When copying onto OHP transparencies, remove copied sheets one by one.
Copying from the Bypass Tray
53