Paper type and weight Paper size Paper capacity
Label paper (adhesive labels) • When no finisher is
installed
B4 JIS , A4
• When a finisher is
installed
A4
1 sheet
*1
Select the paper size. For copier mode, see "Copying onto Regular Size Paper from the Bypass Tray",
Copy/ Document Server. For printer mode, see page 153 "Specifying regular sizes using the control
panel".
*2
Enter the paper size. For copier mode, see "Copying onto Custom Size Paper from the Bypass Tray",
Copy/ Document Server. For printer mode, see page 154 "Specifying a custom size paper using the
control panel".
*3
In printer or facsimile mode, the maximum horizontal length of the custom size is 1,260 mm (49.60
inches). If you want to print on paper with a vertical length of 600–1,260 mm (23.62–49.60 inches),
contact your service representative. If you want to load paper with a vertical length of 600 mm (23.52
inches) or longer in the bypass tray, it must have a horizontal width of 305 mm (12.1 inches) or less.
*4
When paper larger than 432 mm (17 inches) in size is used, the paper may become wrinkled, may not
be fed into the machine, or may cause paper jams.
*5
Printing on thick paper 1 - 4 of A5
is not supported.
LCT
Paper type and weight Paper size Paper capacity
52–128 g/m
2
(14 lb. Bond–34 lb.
Bond)
Plain Paper–Thick Paper 1
A4
8
1
/
2
× 11
4,000 sheets
52–128 g/m
2
(14 lb. Bond–34 lb.
Bond)
Plain Paper–Thick Paper 1
*1
B5 JIS , 8
1
/
2
× 11
A4 , B5 JIS
4,000 sheets
*1
To load paper any of the sizes specified above, contact your service representative.
Recommended Paper
167
To Next Page
Loading...
Need help?
General
