Message Cause Solution
"Any of Login User Name,
Login Password or Driver
Encryption Key is incorrect."
The entered login user
name, password, or driver
encryption key was invalid.
Check your login user name, login
password, or driver encryption key,
and then enter them correctly. For
details about login user name, login
password, and driver encryption key,
see "Encrypting Transmitted
Passwords", Security Guide.
"Authentication succeeded.
However, the access
privileges for scanner
function has been denied."
The logged in user name
does not have permissions
for scanner function.
For details about how to set
permissions, see "Limiting Available
Functions", Security Guide.
"Cannot add any more
scanning mode."
The maximum number of
registrable scan modes has
been exceeded.
The maximum number of modes that
can be stored is 100. Delete unneeded
modes.
"Cannot specify any more
scanning area."
The maximum number of
registrable scan modes has
been exceeded.
The maximum number of scanning
areas that can be stored is 100. Delete
unneeded scanning areas.
"Clear Misfeed(s) in ADF." A paper misfeed has
occurred inside the ADF.
• Remove the jammed originals,
and then insert them again. For
details about jammed paper, see
"Removing Jammed Paper",
Troubleshooting.
• When a misfeed occurs, replace
the jammed originals.
• Check whether the originals are
suitable to be scanned by the
machine.
10. Troubleshooting
226
To Next Page
Loading...
Need help?
General
