Ricoh Pro C751 EX - Entering Text; Text Entry Basics

Adding Staples to Booklet Finisher SR5040 (Saddle Stitch)
Hold both sides of the cartridge,
and then raise the upper unit.
Remove the empty refill in the
direction of the arrow.
Push in the new staples until
the arrows are aligned.
Raise the levers. Pull out the cartridges gently.
Push down the upper unit into
the cartridge gently.
Hold the levers, and then push
in the cartridges.
Push in the cartridges until they
click, and then lower the levers.
Return the staple unit to its
original position.
Close the finisher front cover.
Open the finisher front cover.
Pull out the staple unit.
CDL069
Adding Staples
107
3