You can change the amount of time the machine waits before switching to the Low power mode
under Energy Saver Timer.
Auto Off
If the machine remains inactive for a specified period, it automatically enters the same low power
state that it enters when the operation switch is pressed (indicator unlit). This function is called “Auto
Off”.
You can change the Auto Off time under Auto Off Timer.
• See “System Settings”, Network and System Settings Reference .
• The Energy Saver, Low power mode, and Auto Off functions will not operate in the following
cases:
• When a warning message appears
• When the service call message appears
• When paper is jammed
• When the cover is open
• When the "Add Toner" message appears
• When toner is being replenished
• When the User Tools / Inquiry screen is displayed
• When the Counter screen is displayed
• When the Tray Paper Settings screen is displayed
• When fixed warm-up is in progress
• When data is being processed
• When operations are suspended during printing
• When a recipient is being registered in the address list
• When the Data In indicator is on or blinking
• When the internal cooling fan is active
Anti-humidity Heater Switch
During winter or humid periods when there can be sudden changes in temperature and humidity, the
paper in the paper trays can absorb moisture. This may cause image quality to deteriorate.
To prevent this, the machine has two built-in anti-humidity heaters.
There are two switches for the anti-humidity heaters on the internal cover which is revealed when the tray
1 is pulled out. Turn these switches on if the humidity level becomes high and image quality is affected.
Turn the switches off at other times.
1. Getting Started
58
To Next Page
Loading...
