20. Function keys
Press to display the operation screen of one of the following functions: copy, Document Server, printer, or
scanner.
The indicator to the left of the key whose function you selected lights up. See p.53 "Changing Modes".
If an error occurs, the indicator to the right side of the function key lights up. Press the function key to change
the display, and then follow the instructions that appear.
21. Alert indicator
Lights continuously if an error has occurred.
22. Data In indicator (printer mode)
Flashes when the machine is receiving print jobs from a computer.
23. [New Job] key
Use this key to set up the next copy job while a copy job or storing data in the Document Server is in progress.
24. Screen contrast slider
Adjusts display panel brightness.
Adjusting the Angle of the Control Panel
Use the following procedures to adjust the angle of the control panel for easier use.
1. Position the control panel at the horizontal angle that you require.
To Next Page
Loading...
