5. [Interrupt] key
Press to make interrupt copies. See “Interrupt Copy”, Copy and Document Server Reference .
6. Main power indicator
The main power indicator goes on when you turn on the main power switch.
7. Operation switch
Press to turn the power on (the operation switch indicator will light up). To turn the power off, press this switch
again (the operation switch indicator goes off).
See p.55 "Turning On/Off the Power".
8. [Energy Saver] key
Press to switch to and from Energy Saver mode. See p.57 "Saving Energy".
9. [Login/Logout] key
Press to log in or log out.
10. [ ] key (Enter key)
Press to confirm values entered or items specified.
11. [User Tools] key
Press to change the default settings to meet your requirements. See “Accessing User Tools”, Network and
System Settings Reference .
12. [Paper Setting] key
Specify settings for the paper tray. See Paper Settings Reference .
13. [Counter] key
Press to check or print the counter value. See p.127 "Counter".
14. [Language] key
Press to change the language of the display. See p.47 "Changing the Display Language".
15. [Simple Screen] key
Press to switch to the simple screen. See p.46 "Simple Screen".
16. [Sample Copy] key
Press to make a single set of copies to check for print quality before making multiple sets. See “Sample Copy”,
Copy and Document Server Reference .
17. [Start] key
Press to start copying, scanning, or sending.
18. [Clear] key
Press to delete an entered number.
19. [Stop] key
Press to stop a job in progress.
This key does not function when the machine is in the printer mode.
Control Panel
43
To Next Page
Loading...
