• Even if you press the operation switch, the operation switch indicator does not go out, but blinks in
the following cases:
• During communication with external equipment.
• When the hard disk is active.
• When the internal cooling fan is active.
Turning Off the Main Power
The procedure for turning off the main power varies depending on the machine's configuration. For
details, see the procedure for turning off the machine's color controller.
Saving Energy
This machine has the following energy saving functions.
Energy Saver
If you do not use the machine for a certain period after an operation, or when you press the
[Energy Saver] key, the display disappears and the machine goes into Energy Saver mode. When
you press the [Energy Saver] key again, the machine returns to the ready condition. The machine
uses less electricity in Energy Saver mode.
You can change the amount of time the machine waits before switching to Energy Saver mode after
copying has finished or the last operation is performed under Panel Off Timer.
Low power mode
If you do not use the machine for a certain period, it automatically lowers its power consumption.
When you press the [Energy Saver] key, the machine returns to ready condition.
Turning On/Off the Power
57
To Next Page
Loading...
