Energy Saving Functions
To reduce its power consumption, this machine has the following functions:
Low Power Mode
• If this machine remains idle for a specified period, it automatically reduces its electrical
consumption.
• The default period the machine waits before entering Low Power Mode is 15 minutes. This
default time can be changed.
Sleep Mode
• If this machine is already in Low Power Mode and remains idle for a specified period, it
automatically enters Sleep Mode to further reduce its electrical consumption.
• The default delay time the machine waits before entering Sleep Mode is 60 minutes. This
default time can be changed.
• The machine can print jobs from computers while in Sleep Mode.
Specification
Type 1 Type 2
Reduced Electrical Consumption by Low
Power Mode
400 W or less 400 W or less
Time of Switch into Low Power Mode 15 minutes 15 minutes
Time of Switch out from Low Power
Mode
100 seconds or less 100 seconds or less
Reduced Electrical Consumption by
Sleep Mode
20 W or less 20 W or less
Time of Switch into Sleep Mode 60 minutes 60 minutes
Time of Switch out from Sleep Mode 300 seconds or less 300 seconds or less
• Specifications can vary depending on which options are installed on the machine.
• For details about how to change the default interval, see “Timer Settings”, Network and System
Settings Reference .
• Depending on which Embedded Software Architecture application is installed on it, the machine
might take longer than indicated to enter Sleep Mode.
34
To Next Page
Loading...
