• Straighten curled or warped paper before loading.
• For details about paper sizes and types, see p.83 "Recommended Paper Sizes and Types".
Loading Paper into Tray 1 (Tandem Tray)
• When paper loaded in the right side of tray 1 runs out, paper on the left is automatically shifted to
the right. Do not pull out tray 1 while the tray is moving paper; wait until sounds stop coming from
the tray.
• If tray 1 is closed too quickly, the paper in the tray may force the right tray's side fence to slip out of
place. If the paper misfeeds because of this, open the tray, adjust the fence, and close the tray
slowly.
• For the right stack, align the right edge of the copy paper with the right edge of the tray. For the left
stack, align the left edge of the copy paper to the left edge of the tray.
• Tray 1 can hold 8
1
/
2
× 11 paper only. If you want to print on A4 from tray 1, contact your
service representative.
1. Carefully pull out the paper tray until it stops.
To Next Page
Loading...
